How To Fix Skateboard Bearings – Quick and Easy Guide
This guide attempts to help you identify potential causes, offer ways to prevent these problems, and most importantly, provide ways on how to fix skateboard bearings.
Since problems surrounding your skateboards oftentimes occur due to poor maintenance and concussive impact onto the skateboards. And the bearings are some of the more vulnerable parts as they are small and have to endure constant friction.
Common Problems And Solutions
Let's first look at some potential issues people have with the bearings:
- They make excessive noise
- They become rusted
- Dirt build-up inside them
They all have vastly different causes, so it only fits that we approach them individually.
#1. Noisy Bearings
After a while of skating, you may find your bearings making loud squeaky or rattling noises. Some of these noises get irritating and distracting and overall making your skating sessions less enjoyable.
Ask for the cause, it can be because the grease in the parts have run out, or you don't have spacers between the bearings.
It is inevitable that lubricants inside will dry out. Lacking lubricant can be detrimental since the friction drastically increases, making the parts wear down more quickly. Worn bearings give rise to less optimal roll, or worse yet, dangerous accidents like wheels falling off mid-skate.
See also: Top 7 Best Skateboard Lubricant in 2021
The other reason is that there are no spacers on your skateboard. Your spacers can break off after many intense maneuvers. This can also create lots of unwanted friction.
You can prevent this problem from happening by tuning down on the intensity of your moves and tricks. Keep your skateboards inside and on a rag, preferably. Please don't leave them outside and exposed to the elements. Regular checking and caring are always key too.
To stop the noises. You must re-lubricate your bearings if they are all dried up. First, take them out before removing the shields. Then, using acetone, soak and clean them. Grease them up and put them back onto the skateboard.
When you are in a rush and there isn't dirt on the parts, however, you could just drip lubricant on them. If you lack the spacers, be sure to quickly look to repair them. You can have skate shops fix them for you, or buy the necessary parts and tools and do it yourself.
#2. Rusty Bearings
Generally, it is advisable not to skate on wet roads or in the rain. Not only is it extremely dangerous, but it also means that you are exposing your skateboards to water, making them susceptible to tearing down.
Water entering the inside of your bearings will partially wash the grease off and cause rusting. Rusted parts can, again, create terrible friction, slow down your skate, or cause serious accidents leading to injuries.
Your best bet is to avoid skating in wet and damped places. Don't skate into puddles. Though it can seem very fun and tempting, try to resist it. You ought to keep your skateboards on a rag away from places that are too humid.
If they are wet after skating, dry them with clean drag. Make sure that the metal parts, including the bearings, are dry.
Removing the rust is not as tricky as some of you might have thought. You will need to prepare a used cup, a used toothbrush or a piece of cloth, some white vinegar, and acetone. After you degrease the rusted parts with acetone, dry them and submerge them into the vinegar.
Next, let them sit in the solution overnight, or you can actively speed up the process by periodically taking the parts out then scrub them with the toothbrush. Finally, take them out to dry and re-lubricate.
#3. Dirty Bearings
Dirt will eventually build up inside the parts, whether you like it or not. Skating in bad weather on dirt roads speeds this up.
Dirt slows down your skateboards significantly, and you are also running a risk of permanently damaging the parts.
Needless to say, we recommend you avoid skating in those places mentioned above, but, perhaps, the most effective method would be to keep up consistent maintenance.
Cleaning them pretty much follows the same steps as mentioned before.
- Take them out
- Soak and clean them
- Dry and oil them
- Put them back
Knowing how to fix skateboard bearings is essential in keeping your skateboards in their best condition. However, we do think that the most effective way to do so would be through regular maintenance. Try to check on your skateboards every week or so.
We hope you find our article above helpful and have fun skating!