Top 9 Best Skateboard Decks For Street – Review With Buying Guide
The skateboard's deck is the part you will be standing on to control the board whenever you ride it. As such, it is imperative that you pick out the best skateboard decks for street.
There are, however, just so many available options for you to choose from due to the popularity of skating. To help you with this problem, we have prepared 9 of the best options, each with its own clear strengths and weaknesses.
Top 9 Best Skateboard Decks For Street Skating 2021
1. Bamboo Skateboards Deck Only Graphic Skateboard – Best Overall
Material: Bamboo-Maple Combination
Dimensions: 7.75" x 31.5", 8" x 31.75", 8.25" x 32”
The Bamboo Skateboards's Only-Graphic Skateboard Deck deserves one of the best street skate decks for its absolute advantage over all the other options on this list.
Instead of the usual full-maple choice, Bamboo Skateboards decide to incorporate bamboo into the veneers. It was this decision that provided us with a skate deck both more stable and flexible than any other competitor.
As the main material is a combination of bamboo and maple, the deck gains bamboo's famous elasticity while retaining the maple's strength. This factor improves the control you have over the whole deck to a whole new level
As long as you do not surpass 300 pounds, this deck is strong enough for you to do numerous tricks without worrying about it breaking. That is the strength of maple further increased by bamboo.
The only issue that we found against this deck is the fact that it's not too great at taking direct pressure. In other words, if you fail to do any trick, the damage done to this bamboo deck will be much higher.
2. Rabd Natural Maple Blank Skateboard Deck – Best For Popping
Material: Maple Wood
Dimensions: 8" x 32”
The best thing about the rabd Natural Maple Blank Skateboard Deck is how easy it is to pop with this deck. In other words, the chance of you failing the trick and injuring yourself is close to non-existent while riding this deck. You can freely try any trick you want and no longer fear injuries.
Of course, popping tends to lead to damage to the skateboard, especially the deck. You don't need to worry about this issue if you are using this skateboard deck.
While its material is just normal maple wood, the pressing process is done spectacularly with high-quality Franklin Multibond glue, improving the deck's pressure resistance.
It also allows you to choose from a vast number of available designs. No matter how peculiar your taste is, you will be satisfied. After all, the 14 available designs are just too versatile. There are plain color coats as well as interesting and quirky designs.
However, we notice that there seems to be no grip tape offered alongside the deck. We consider this as a gross oversight, as the need for grip tape is always present as long as you still skate.
3. JFJ Double Tail Maple Skateboard Deck – Best For Beginners
Material: Maple Wood
Dimensions: 8" x 31"
If you are a beginner, you don't need a highly specialized skateboard deck with an impressive concave. You are still learning the rope, so you need something like the JFJ Double Tail Maple Skateboard Deck. While this deck cannot carry you with flashy tricks, it can fit with many skating styles.
The secret lies with its medium concave. This concave is enough for all beginner flipping tricks yet not too high that you will have an issue controlling the deck. With this kind of balance, you can quickly learn the basics of street skating with minimum injuries.
This deck's flexibility is relatively high, thanks to it being made from cold-climate maple and also its 8-ply construction. For those who don’t know, cold-climate maples’ fiber tend to have more elasticity. As a result, you can easily do deep turns, even in small alleys.
We do want to note that the deck does have its own issues. The most glaring one is the mounting holes. You will find these holes to be a bit off-balance, so it's necessary to cut them again to fit the trunk properly.
4. [CCS] Professional Grade Graphic Skateboard Deck – Best For Bigger Skaters
Material: Canadian Maple Wood
Dimensions: 7 to 8" in width
The bigger your body is, the more force it will cause whenever you fall down onto the deck. That is why most decks cannot serve bigger skaters, aside from the [CCS] Professional Grade Graphic Skateboard. With its 330-pound loading capacity, this deck can withstand any heavy skater.
The reason behind this deck's amazing weight capacity comes from the manufacturer's careful pressing process. By allowing the glue to spread evenly among the layers, the deck receives a construction stronger than any other option.
Adding to this is the fact that they use Canadian maple wood for the board. As we have mentioned above, maple woods in colder climates have high-density fibers with lots of elasticity. That is why each veneer is strong by itself. This, coupled with the strong construction, improves its strength even more.
We are, however, fairly disappointed to find that there is no grip tape accompanying the deck. While seasoned skaters don't need these tapes as much, they are incredibly necessary for beginners.
5. Moose D063 Canadian Maple Skateboard Deck – Best Customizability
Material: Canadian Maple Wood
Dimensions: 7 to 8.75" in width
The selling point of the Moose D063 Canadian Maple Skateboard Deck lies in its customizability. The whole deck is colored in a blank style, allowing you to customize its appearance depending on your taste. For instance, you can use the blankness as a base and add patterns of your choice.
Unlike other blank decks above, this one comes with a plain color base instead of a natural wood color, which makes your graphics appear clearer, more high-contrast, and eye-catching.
The customizable nature of this deck extends far beyond its appearance. It is the only one on this list allowing you to freely pick a size. As long as the number you fit belongs in the 7.0" to 8.75" range, you can pick any size, like 7.63" or even 7.875".
We are not that impressed with its resistance against direct contact pressure, though. This weakness limits the deck from some intense tricks that street skaters like to do.
6. Blank Decks 1DEWBN775 Warning Deck – Best Value
Material: Maple Wood
Dimensions: 9" x 34”
You should not be deceived by the price of the Blank Decks 1DEWBN775 Warning Deck. Despite costing just about half of most options on this list, this deck's quality can challenge even the best of them. That is why we say it offers the most value for the price.
It is made from solid maple veneers with the usual 7-ply construction. As such, you can expect its durability to be high and its stability to dwarf even some other options here.
Moreover, this deck has one of the most impressive concaves that we have seen. The concave isn't just high but also perfectly designed for the most precise response possible to your movements. For this reason, you can quickly adjust the deck while in high-speed mode.
Of course, there are still some flaws that we found within the board. The first and most obvious one is its size, which is a little too big for street skating.
7. LOSENKA Double Tail Russia Maple Skateboard Deck – Best Elasticity
Material: Russian Maple Wood
Dimensions: 8" x 31.75"
Aside from the bamboo deck, there is no other option better than the LOSENKA Double Tail Russia Maple Skateboard Deck in elasticity. The cause of this elasticity comes from the Russian wood fiber used for this deck, which has a much higher density than normal maple wood.
Due to its elastic nature, you can apply force into unique points that you can’t do with normal decks. Doing so will result in the deck bending. This bending is the base for many of the flashiest street skating tricks.
The deep concave can guarantee that you feel exactly what is under the deck. That is why you can quickly adjust your pressure according to the floor, reducing the risk of falling.
However, you must keep in mind that this deck is not as forgiving if you make a mistake. Its elasticity level is too high, so it receives more damage if you apply pressure to the wrong points.
8. Stoked Ride Shop 7-Ply Skateboard Deck – Best Versatility
Material: Canadian Maple Wood
Dimensions: 7.75" x 32"
The Stoked Ride Shop 7-Ply Skateboard Deck is the only deck on this list capable of serving both as a transition and street deck. The reason for this amazing versatility lies with its size. Its 7.75" width is perfect for street tricks, and its 32" length can carry you through the hardest transitions.
This deck’s main material is high-quality Canadian maple, which is well-known for its maintainability, lightweight, and solidness. This, coupled with the rigorous quality assurance process that the Stoked Ride Shop is known for, provides you quite a strong board.
You can choose from a multitude of colors for this deck, from the usual natural to blue, green, purple, and red. Your peculiar taste will surely be satisfied.
The only problem that we observed from this deck lies with its rigidness. As you may know, too much rigidity limits you from performing some street flipping tricks.
9. Moose Natural Blank BK172-NAT Skateboard Deck – Best Concave
Material: Canadian Maple Wood
Dimensions: 7.25" x 31"
As we have mentioned above, the deck concave is a deciding factor for the skateboard's overall performance. It is also the selling point of the Moose Natural Blank BK172-NAT Skateboard Deck. This deck's concave is high enough to feel the floor and low enough for easy foot placements.
Also, the 7.25 width of the deck is the perfect number for a street skating deck. While this width is not that good to control in high-speed situations, it allows you to maneuver the whole board easily. That is why you will be able to do the flashiest of tricks once you can control the deck.
The deck's mounting holes are also spread perfectly, so you don't need to cut them again. All you need to do is attach the trunk into the holes, and the deck is ready to go.
Some customers did mention that they receive decks with noticeable pressure cracks. We believe that this is an issue with the manufacturer's quality assurance process, as these cracks can only happen if you lock the bolt down too hard.
Best Skate Decks For Street Buying Guide
The most vital aspect of a skateboard for skaters is undeniably its deck width. To determine the width of your deck, you will need to consider a few things.
While transition skating requires things like parks, pools, or at least ramps, street skating is about repurposing the environment. Street skaters will ride on anything, from stair sets to benches and even ledges.
Almost all of our tricks are about flipping, which is a lot more technical and requires an incredible level of maneuverability. That is why you should get a smaller deck, preferably in the range between 7.5" and 8.25".
In this range, you can decide on a specific number based on your feet' size. If your feet are small, stick with the scale's narrower side and do the opposite if you have large feet.
Sizing is always focused on the feel of your feet. As long as you feel comfortable with the board, the size is good.
Wheelbase And Deck Length
We recommend getting a deck that is about 31" long, as exceeding this number means you have a wider board. In fact, a deck 33" in length will be exactly 8.5" in width. As we have mentioned above, the optimal deck width for street skating decks should never exceed 8.25".
The relationship between the length of a deck and its wheelbase is proportional. As a result, a longer deck will have a longer wheelbase. Longer wheelbases improve the stability of the board as well as its turning radius.
Shorter wheelbases have less stability but are sharper and have smaller turning radius. They also respond quicker to the movements you make.
From our experience, the stability that comes with longer wheelbases is much more beneficial for transition skating. Street skating, on the other hand, requires less stability and sharper turns for tricks, so you need shorter wheelbases.
A less experienced skater will be surprised to learn that the traditional "popsicle" shape is not the only board shape. While it is certainly the most popular, you can actually pick from a wide variety of deck shapes.
For example, you can get decks with unique shapes like square tails and noses, pointy and tapered noses, or tapering-in fishtails that bow out, etc.
In the specific context of street skating, the popsicle deck often leads by a mile for functionality. Its nearly symmetrical nature and upturned, rounded noses/tails allow riding and trick performing in 2 stances.
Of these 2 stances, the "normal" one means skating with your dominant foot put forward. The "goofy" stance means putting the non-dominant foot forward, which is much more challenging.
The popsicle shape's near symmetrical nature also ensures an easier time learning numerous flip tricks. In the same vein, the upturned noses and tails are vital for flipping, as they provide you with the ability to flip the board.
Most beginners tend to overlook this variable, but deck concave is actually the most technical characteristic of a skateboard. It affects the way your feet feel the board and also the board's response to your movements.
What we call concave is the curves, both upward and downward, across the surfaces and edges of your deck. In other words, it's the shape of your deck's profile.
The more extreme your deck's concave is, the better the feel of the deck's shape will be for your feet. It is easier to instinctively know where your feet are in relation to the deck's sides, nose, and tail. This capability is especially helpful for high-speed situations.
However, its importance is not as high for street skating, as this style is not as dependent on high speed. That is why you should choose decks with a mellow concave, allowing for a reasonably optimum feet placement.
Also, skates with less pronounced concaves always have a bigger space for your feet. Your feet will, in turn, have a lot more available placing points across the board, which is imperative for flip tricks.
While the material can be altered, the process of building a skateboarding deck has changed very little. It will start with the veneer collection process, where the workers prepare all the necessary veneers for the decks.
They then glue each veneer, aside from the face, to each other with PVA and press them together in groups of 4. Doing so allows the decks to have different concaves.
To be precise, the top deck will have the biggest concave alongside the steepest kick. The bottom one has the smallest concave and is more suitable for cruising.
The pressing step is actually quite important, as it will also decide whether or not the layers stick together. If the pressure applied is enough, the glue will spread out evenly throughout the deck.
Improperly pressed decks will suffer what we call delamination. Whenever a delaminated deck sustains any impact, there will be a shear between each veneer, pulling them apart.
As we have mentioned above, no matter which kind of material is used, the deck is always a combination of 7 layers. That is why it is imperative that the adhesive the manufacturer uses can hold all the veneer plies together.
To do so, the adhesive must be highly resilient, adhesive, and capable of holding the shape over a long time. It also should be water-proofed, as all decks will eventually make contact with water.
At the moment, the most common adhesive seen in skate decks is polyvinyl glue or polyvinyl assembly adhesive. It is a water-based, non-toxic glue mixture that can dry up fairly fast.
How long is a skateboard deck for street supposed to last?
Depending on the frequency you are using them and the way you maintain them, decks can last anywhere between 2 weeks and 6 months. Remember that the more technical you are, the quicker the deck breaks.
See also: How Long Do Skateboards Last ?
What are the best street skateboard deck brands?
There are quite a lot of good brands created by skateboard legends. Among them, the currently oldest brand still in production with high-quality is the Santa Cruz Skateboards.
There is also the Elements Skateboards brand, known for their high-quality decks and interesting decorations.
What size street skateboard deck do pros use?
Unlike us, pros’ control on their skateboard is simply impeccable. That is why they don’t need the better maneuverability of smaller decks. Instead, most of them opt for the 8.5” deck.
Does shoe size matter for skateboard decks for street?
The short answer is yes, shoe size matters quite a bit for picking a skateboard deck. If your feet are bigger than the width of the deck, you will struggle while skating.
After all, there will be almost no space for you to put your feet. Some tricks also require you to change your feet positions continuously.
With this article, we have introduced you to 9 best skateboard decks for street. To make it easier for you to make a decision, we have also included a thorough and concise buying guide.
We believe that the unquestionably best choice is the bamboo skateboard deck. Due to the combination of bamboo and maple, this deck has both strength and flexibility. You can perform almost all street tricks riding it without worrying about damaging the deck.
Of course, the best choice may not be suitable for some specific cases, that’s where the others shine. We hope that you can now pick out from our 9 options the most suitable deck for your situation.